Diebold offers a wide product range of taper measuring instruments for measuring HSK, SK, BT and D-BT tapers as well as taper measuring gauges for HSK spindle tapers.
The product range of measuring technology also includes pull force gauges for spindles with HSK, SK, BT and PSC tapers, test arbors for run-out test of spindles and several special measuring instruments.
Certified multipoint measuring instruments for HSK tapers & steep tapers
Benefit from our high-precision multipoint measuring instruments for measuring HSK tapers and steep tapers. We produce certified master tapers of the highest accuracy level according to the rules of the German Calibration Institutes on the basis of multiply certified master taper gauges.
Diebold taper measuring instruments for fast and reliable measuring of HSK tapers or steep tapers are used by the world´s most renowned tool manufacturers and a large number of end users of HSK tool holders. With Diebold taper measuring instruments, you can always ensure that your HSK tools have the greatest possible accuracy and maximum reliability.
Mechanical pull force testers from Diebold are used to test the pull-in forces of clamping systems in machine spindles.
The pull-in forces of the clamping elements in the spindle can decrease due to fatigue spring assemblies, dry running of the grippers or wear. The clamping force to hold HSK tool holders becomes too low. As a consequence, radial stiffness, radial run-out and the repeatability accuracy of the tapers are affected. Consequences are rapid wear of the spindle and of the tool holders. Expensive damages to the machine spindle and the workpiece can be avoided by periodically checking the pull force of your spindles.
The mechanical pull force gauges form Diebold are accurate (measuring accuracy ± 3 %) and robust, cost-effective and reliable, without the use of electronic parts.
Diebold run-out test arbors are certified arbors for aligning and measuring your machine tool and to check your spindle run-out.
The test bars are manufactured in our fully air-conditioned factory and are measured and calibrated with the most precise measuring machines – they come with a quality certificate from the specialist for test bars and spindle and tool holder measuring equipment.
As a service, we offer you the calibration and certification of your test arbors made by Diebold and from other manufacturers. We guarantee the traceability to the standards of the German Calibration Service Institute.
High-precision taper measuring instruments from Diebold ensure that you can check the functional dimensions such as taper angle at an early stage and avoid spindle damages.
Cheap tool holders are sold on the world market every day. The quality is always compromised due to the enormous price pressure. The functional dimensions such as taper angle, taper diameter and clamping shoulder angle are crucial, but they cannot be checked without suitable measuring instruments. Inaccurate tool holders lead to poor machining results and cause spindle damages.
Diebold offers taper gauges for tapers BT tapers with face contact in various sizes (D-BT 30, D-BT 40, D-BT 50). The D-BT taper gauges are used for the precise measurement of the large and small taper diameter as well as the straightness of the taper line.
Control spindles are used to check the run-out of the cutter side of HSK tool holders. The tool holders are clamped by an integrated manual HSK gripper to simulate the clamping situation as is in the machine spindle. For the runout test we recommend to use our prism device.
For measuring of HSK spindle tapers. The taper diameter is measured via the plane distance, the taper angle via contact.
The alignment tool is used to check the position angle of a tool holder in the tool magazine (M19 function).
Setting gauges for the drawbar position and monitoring of the sensor position guarantee a smooth production process.
Our balancing masters for HSK and SK spindles hold the tool gripper fingers permanently in place during the imbalance measurement. For a perfect measuring result!
The all new DIEBOLD VEG Basic is our new entry-level tool presetting and measuring system. Its robust structure and user-friendly software interface allow customers to benefit from a basic, essential unit with a tangible, long-lasting performance.
New Presetters with Innovative Vision Control.The VEG PLUS tool presetting devices and measuring instruments have revolutionized the entry-level tool presetting range. The innovative SIMPLE VISION controller provides all the required measuring functions in one easy-to-use and trouble-free user interface on one screen.
Diebold 3D edge finders are used for the precise setting of workpiece reference points in all 3 axes.
The 3Dpro is a fully sealed edge finder. The dial gauge and the sensiitiv mechanism are protected from moisture or coolant. This ensures a long service life.
The 3Deco is only suitable for use in a dry environment.
As a part of our services, we offer professional inspection of your tool holders. Send your tool holders to us and we will inspect and measure the tapers. You will receive protocols for each tool holder and a list of all documented measurements. This service was developed at the request of customers, because their tool holders and thus their machining processes cause problems, but the user cannot identify the reasons himself. Many customers have asked us to check their stock of tool holders and to evaluate the measurement results so that they can take decisions as to whether or not these tool holders can be used for the desired machining operations.
We are happy to carry out this service for you. If you are interested, please contact our service department by e-mail at email@example.com or by phone at +49-7477-871-712.
Do not hesitate to use our Quality-Check Service.
By using Diebold measuring technology you can achieve maximum machining accuracy in your production.
Our customers around the world appreciate Diebold measuring technology every day.
With Diebold measuring technology, you can check your tool holders and your machine spindles at any time. This will save you expensive service cost.
Annual calibration of your measuring equipment with measuring protocol at Diebold.